• Your shopping cart is empty!

Emulex LPe12000 8Gb Fibre Channel PCIe 2.0 Single-port Host Bus Adapter

  • Brand: Emulex
  • Part Number: LPe12000
  • Condition: Factory New Sealed
  • Availability: In Stock
  • Ships: Typically within 2 Business Days
  • Warranty: 3 Years


Emulex LPe12000 8Gb Fibre Channel PCIe 2.0 Single-port Host Bus Adapter, LPe12000-M8, LPe12000-E, LPe12000-AP
Streamlined installation and management, unrivaled scalability, and industry-leading virtualization support make the single-port Emulex LPe12000 and dual-port LPe12002 8Gb Fibre Channel (8GFC) Host Bus Adapters (HBAs) for EMC ideal for enterprise, mixed-OS and virtual server environments.

Key benefits
  • Provides superior performance for the enterprise
  • Integrates seamlessly into existing SANs
  • Supports IT server consolidation and energy conservation initiatives
  • Allows application of SAN best practices, tools and processes with virtual server deployments
  • Protects sensitive data from unauthorized access
  • Assures data availability and data integrity
  • Improves IT staff productivity through simplifi ed deployment and management

Key features
  • Support for Message Signal Interrupts eXtended (MSI-X), improves host utilization and enhances application performance
  • Support for 8GFC, 4GFC and 2GFC devices
  • Comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV) and Virtual Fabric
  • Host to Fabric FC-SP authentication
  • Long wave optical transceiver model available—allows the board to transmit signal over long distances
  • Secure management with rolebased administration integrated with Light Directory Access Protocol (LDAP) and Active Directory (AD) services
  • End-to-end T10 PI data integrity for protection against silent data corruption events
  • Common driver model allows a single driver to support all Emulex HBAs on a given OS
  • Easy deployment of new firmware with minimal server reboots
  • Efficient centralized administration of Emulex HBAs via powerful management tools
  • PCIe 2.0 bus compliant, with PCIe 1.0 backward compatibility supported

  • ANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1
  • PCI Express base spec 2.0
  • PCI Express card electromechanical spec 2.0
  • Fibre Channel class 2 and 3
  • PHP hot plug-hot swapArchitecture
  • Single-port (LPe12000) or dual-port (LPe12002)
  • 8GFC, 4GFC or 2GFC link speeds automatically detected
  • Integrated data buffer and code space memory

Comprehensive OS and hypervisor support
  • Windows Server
  • Linux
  • Solaris
  • VMware vSphere
  • Windows Hyper-V
  • Additional support is available from OEMs and partners

Hardware environments
  • PowerPC, SPARC, x86, x64 and Intel Itanium 64-bit processor family

  • Data rates: 2.125, 4.25 and 8.5GFC (autodetected)
  • Optics: Short wave lasers with LC type connector
  • Cable: Operating at 8GFC
    • 50/125μm (500MHz*km BW)-up to 50m
    • 50/125μm (2000MHz*km BW)-up to 150m 

Physical dimensions
  • Short, low profile MD2 form factor card
  • 167.64mm x 68.91mm (6.60” x 2.71”)
  • Standard bracket (low profile available)

Power and environmental requirements
  • Volts: +3.3, +12
  • Operating temperature: 0° to 55°C (32° to 131° F)
  • Storage temperature: -40° to 70°C (-40° to 158° F)
  • Relative humidity: 5% to 95% noncondensing
  • 23°C wet bulb

For more specifications of this LPe12000, please visit below Broadcom website:


This LPe12000 is 100% genuine Emulex product. It won't have any compatibility problem with your Emulex devices. And the Emulex LPe12000 8Gb Fibre Channel PCIe 2.0 Single-port Host Bus Adapter is factory new with original packaging. Buy it now and enjoy risk free purchase with fast worldwide delivery from GenuineModules.com

There are no reviews for this product.

Write a review
Note: HTML is not translated!
    Bad           Good