100g WDM is a type of optical fiber technology that enables the transmission of multiple wavelengths of light over a single fiber. It is used to increase the capacity of fiber optic networks, allowing for more data to be transmitted over a single fiber. It is also used to reduce the cost of deploying fiber optic networks, as it requires fewer fibers to be installed. 100g WDM is a cost-effective solution for high-speed data transmission, providing up to 100 gigabits per second of data transfer. It is used in a variety of applications, including data centers, telecommunications, and cable television.
The Cisco 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and dis..
The Cisco 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and dis..
The Cisco 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and dis..
Cisco CPAK 100GBASE fiber modules for Cisco switches and routers offer a selection of high-density 100-Gbps connectivity solutions. The modules are especially well suited for connections in enterprise and service provider data centers and in service ..
The Cisco family of QSFP-DD modules provide the industry’s highest bandwidth density while leveraging the backward compatibility to lower-speed QSFP pluggable modules and cables.The Cisco 400GBASE Quad Small Form-Factor Pluggable Double Density (QSFP..
FTLC9152RGPL 100G QSFP28 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. They are compliant with the QSFP28 MSA and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, a..
The Dell 0THPF3 Q28-100G-CWDM4 QSFP28 transceiver delivers fiber connectivity to extend the range of your network. This hot-pluggable transceiver with QSFP28 (Quad Form Factor Pluggable) footprint features a Duplex LC connector. The Dell networking 1..
The Dell 0RP3GV Q28-100G-DWDM2-32 QSFP28 DWDM transceiver supports to multiple 100G links up to 80km over single-mode fiber (SMF) via an CS connector. PAM4 modulation technology allows for DWDM connectivity in a QSFP28 form factor on the 100G ITU DWD..
The Ericsson RDH10272/4 QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet/eCPRI or CPRI links on up to 10 km of single mode fiber. Designed for wireless applications with an extended temperature range (-20°C to +85°C), the trans..
The H3C QSFP-100G-LR4L-WDM1300 QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 2km over single mode fiber (SMF) with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths at..
This ZTE 033030600035 is a transceiver module designed for 2km optical communication applications. The design is compliant to 100GBASE CWDM4 MSA standard. The module converts 4 inputs channels (ch) of 25Gb/s electrical data to 4 CWDM optical signals,..
The ZTE 033030600036 CFP2-100GBASE-LR4 module supports a link length of 10km on standard single-mode fiber (SMF, G.652). 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed..
The ZTE 033030600044 CFP2-100GBASE-ER4 module supports a link length of 40km on standard single-mode fiber (SMF, G.652). 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed..
The II-VI Finisar FTLC1152RGPL2 QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 2 km of single mode fiber. They are compliant with the QSFP28 MSA, CWDM4 MSA and portions of IEEE P802.3bm. Digital Diagnostics fun..
The II-VI Finisar FTLC1152RGPL2-G2 QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 2km over single mode fiber (SMF) with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelength..
II-VI Finisar FTCL1151RDPL3 QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. Designed for outside plant applications with an extended temperature range (-20°C to +85°C), they are compli..
II-VI Finisar FTLC1151RDPL2 QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4. Digital dia..
The II-VI Finisar FTLC1122SDNL-FH second-generation 100G CFP2 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTU4 client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and..