03033DBC
6-port 100GE QSFP28 interface card (X6S,QSFP28)
Huawei
$0.00
| Jeffrey Wright | May 15, 2026 |
|
Works as advertised. Hooked it into a NE40E, linked up at 10G no problem. The 1550nm wavelength is perfect for long single-mode runs. Only complaint is the price—Huawei tax is real. But if you need guaranteed compatibility on Huawei gear, these do the job.
|
|
| Jonathan Carter | Apr 12, 2026 |
|
Handy little iLR optic from Huawei. 1.4km on single-mode is perfect for campus runs where LR is overkill. Runs cool, DOM works, and it's cheaper than full LR. Plugged into a CE switch and linked right up.
|
|
| George Walker | Apr 09, 2026 |
|
Clean signal, accurate DOM, and the industrial eSFP form factor means it's built tougher than standard SFPs. Plug-and-play in Huawei gear. If you need 1G LX/LH in rough environments, this is the part.
|
|
| Donald Anderson | Apr 09, 2026 |
|
These are serious optics for long-haul 100G. The ER4 spec gives you 40km easy. DOM readings are accurate, signal is clean, and it locks fast. Expensive but worth it for the reach.
|
|
| Richard Miller | Apr 09, 2026 |
|
Been running these on a 35km dark fiber link for months—zero drops. The TX power is solid at around 0dBm, RX sensitivity is good. Runs cool, locks fast. Keep a few spares on hand.
|
|
| William Jones | Apr 09, 2026 |
|
Using these for metro dark fiber runs. The QSFP28 form factor, LC connector, 40km range—it checks all the boxes. Huawei build quality is solid. Just make sure your fiber is clean because 100G is unforgiving.
|
|
| Michael Brown | Apr 09, 2026 |
|
Does exactly what it's supposed to. These 02310RAVs are standard 1G copper SFPs—nothing fancy, just reliable. Ran it on an older switch that ran out of RJ-45 ports, worked like a charm.
|
|
| Stomonakov | Mar 23, 2026 |
|
Mostly happy with it. The module was recognized by our Huawei gear with no complaints
|
|
| Swakinova | Mar 16, 2026 |
|
Genuine Huawei unit worked perfectly in our network deployment.
|
|
| Adrian | Jan 28, 2026 |
|
Used the 02311KNR module with a Huawei switch in a 25G uplink port. The device recognized the transceiver on insertion. Link status showed 25G and remained connected during traffic tests. Fiber connection was established without errors. Part number and labeling matched the order.
|
|
English
Dansk
Deutsch
English (UK)
Español
Francais
Italiano
Magyar
Nederlands
Norsk
Polski
Português (Brasil)
Pycckui
Suomi
Svenska
עברית
日本语
简体中文
繁體中文
한국어