$ USD
En En
  • En
  • De
  • Fr
  • Ru
  • Es
  • Pt
  • It
  • Ar
  • Se
  • Nl
  • Jp
  • Tw
  • Gr
  • Th
  • Fi
  • Ko
  • Pl
  • Cn
  • Tr
  • No
  • Dk
  • Il
  • My
  • Hu
  • Hi
  • Your shopping cart is empty!

MikroTik 6-speed RJ-45 module for up to 10 Gbps

  • Brand: Mikrotik
  • Part Number: S-RJ10
  • Condition: Factory New Sealed
  • Availability: In Stock
  • Ships: Typically within 2 Business Days
  • Warranty: 3 Years

$110.00

S+RJ10 - MikroTik 6-speed RJ-45 module for up to 10 Gbps
This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device with active cooling that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network can be upgraded to 10 Gbps, making it ready for the next generation of RJ45 hardware.

S+RJ10 module is supported also on devices with passive cooling, but may require an extra cooling.
The latest revision of S+RJ10 contains "/r2" by the end of serial number. It comes with following improvements:

- Jumbo frames up to 10218 Bytes are now supported for rates 2.5Gbps, 5Gbps and 10Gbps;

- Link speed reporting is fixed - actual link speed in the interface menu is listed. Previously 100M/1G/2.5G/5G link speeds were not reported correctly;

- DDM monitoring (Supply Voltage, Module temperature) is now supported.

Specifications
  • Product code: S+RJ10
  • Connector: RJ45
  • Data Rate: 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, 10 Gbps
  • Distance: up to 200m
  • IP: IP00
  • Size of RAM: 0 KB
  • Storage size: 256 KB
  • Storage type: FLASH
  • Tested ambient temperature: -20°C to 60°C

For more specifications of this S+RJ10, please visit below MikroTik website.
https://mikrotik.com/product/s_rj10

 

This S-RJ10 is 100% genuine Mikrotik product. It won't have any compatibility problem with your Mikrotik devices. And the MikroTik 6-speed RJ-45 module for up to 10 Gbps is factory new with original packaging. Buy it now and enjoy risk free purchase with fast worldwide delivery from GenuineModules.com

Works great! Replaced another SFP that did not perform at full speeds

I replaced another SFP ordered on Amazon that did not perform at full speeds with this one, and it works perfect! Very good speeds and overall good quality.

5

Worked perfectly UDM PRO & ATT

Had purchased another SFP for cheaper but it had connectivity issues. And didn\'t properly negotiate the 5gb speed out of the AT&T gateway. This one worked perfectly as soon as I plugged it in and properly negotiated speeds. Would definitely recommend!

5

Finally a fully compliant 802.3 bz SFP adapter that works with Unifi Dream Machine Pro

I tried Wiitek, 10Gtek Hi!Fiber (for Ubiquiti), and QSFPTEK SFP modules to get my 2gig fiber to work properly, and either it won\'t auto negotiate (QSFPTEK) or it does, and download is fast, but upload is under 100mb -- as in < 5% of rated throughput of my connection. This module works correctly. My downloads and upload speeds are now actually closer 2.3gb, symmetric. Also no issue with hotplugging, the most recent version works fine, no need to restart the UDMP. Also the temperature is not a problem either, put a piece of black paper tape over it and measured with an IR camera (reflective metal doesn\'t show up on IR otherwise) and it registers at 41c, runs actually cooler than the QSFPTEK module I was using before at 1GB. If you\'re having the issue of fast downloads and slow uploads with SFP modules on the UDMP, this resolves that.

5

Worked as expected

The device works as expected. Runs very hot at times.

5

works properly

Does not appear to have the performance/buffering issues see with other transceivers. Did iperf tests with a 10G host and a 2.5G client and a Mikrotik CRS305 switch. Gave 2+G performance in both directions. Speed reported correctly by the switch as 2.5G. Tried on a QSW-2108-2C, link speed reported incorrectly as 10G but iperf tests gave 2+G in both directions so appears to function correctly even in a non-Mikrotik switch. Much cheaper than the AQS-107. My network does not use jumbo frames so I\'m not planning to test that.Seems like a solid budget option that fixes the flow control/buffer overrun issue that\'s been discussed for NBASE-T transceivers.

5

Write a review
Note: HTML is not translated!
    Bad           Good

There is no faqs for this product.

Ask a question
Please login or register to ask question