Emulex LPe12002 8Gb Fibre Channel PCIe 2.0 Dual-port Host Bus Adapter

• Provides superior performance for the enterprise
• Integrates seamlessly into existing SANs
• Supports IT server consolidation and energy conservation initiatives
• Allows application of SAN best practices, tools and processes with virtual server deployments
• Protects sensitive data from unauthorized access
• Assures data availability and data integrity
• Improves IT staff productivity through simplifi ed deployment and management

• Support for Message Signal Interrupts eXtended (MSI-X), improves host utilization and enhances application performance
• Support for 8GFC, 4GFC and 2GFC devices
• Comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV) and Virtual Fabric
• Host to Fabric FC-SP authentication
• Long wave optical transceiver model available—allows the board to transmit signal over long distances
• Secure management with rolebased administration integrated with Light Directory Access Protocol (LDAP) and Active Directory (AD) services
• End-to-end T10 PI data integrity for protection against silent data corruption events
• Common driver model allows a single driver to support all Emulex HBAs on a given OS
• Easy deployment of new firmware with minimal server reboots
• Efficient centralized administration of Emulex HBAs via powerful management tools
• PCIe 2.0 bus compliant, with PCIe 1.0 backward compatibility supported

• ANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1
• PCI Express base spec 2.0
• PCI Express card electromechanical spec 2.0
• Fibre Channel class 2 and 3
• PHP hot plug-hot swapArchitecture
• Single-port (LPe12000) or dual-port (LPe12002)
• 8GFC, 4GFC or 2GFC link speeds automatically detected
• Integrated data buffer and code space memory

• Windows Server
• Linux
• Solaris
• VMware vSphere
• Windows Hyper-V
• Additional support is available from OEMs and partners

• PowerPC, SPARC, x86, x64 and Intel Itanium 64-bit processor family

• Data rates: 2.125, 4.25 and 8.5GFC (autodetected)
• Optics: Short wave lasers with LC type connector
• Cable: Operating at 8GFC
• 50/125μm (500MHz*km BW)-up to 50m
• 50/125μm (2000MHz*km BW)-up to 150m 

• Short, low profile MD2 form factor card
• 167.64mm x 68.91mm (6.60” x 2.71”)
• Standard bracket (low profile available)

• Volts: +3.3, +12
• Operating temperature: 0° to 55°C (32° to 131° F)
• Storage temperature: -40° to 70°C (-40° to 158° F)
• Relative humidity: 5% to 95% noncondensing
• 23°C wet bulb

For more specifications of this LPe12002, please visit below Broadcom website:
https://docs.broadcom.com/doc/12357939

This LPe12002 is 100% genuine Emulex product. It won't have any compatibility problem with your Emulex devices. And the Emulex LPe12002 8Gb Fibre Channel PCIe 2.0 Dual-port Host Bus Adapter is factory new with original packaging. Buy it now and enjoy risk free purchase with fast worldwide delivery from GenuineModules.com